zh-CNfrdeitptrues
  • 1
  • 2

2018.12.07 This week, the mainstream price of China's prebaked anode market fell, mainly due to the low price of raw materials, the downstream electrolytic aluminum market was affected by the cost pressure, and the loss operation of the company had a common impact. The purchase price of the pre-baked anode market of an aluminum company in Shandong in December. Compared with November, it was down by RMB 50/ton.

Production: The implementation of the limited production requirements for limited production in Shandong Province, the overall performance of other regions is normal, but the safety inspection is still severe; Henan region, affected by high environmental protection requirements and heavy pollution weather, in which the enterprises in Gongyi and Fuyang are suspended, it is expected The possibility of resumption of production on January 17 is relatively small. The company's response is expected to be postponed until mid-February, and other areas in Zhengzhou may also face production suspension. The environmental protection situation in Hebei, Jiangsu and Hubei is strict.

Start-up situation: Production: Shandong area: Binzhou, Zibo, Liaocheng area enterprises implement production restriction measures, the current production is normal, Shandong Jinan and other places of normal production, but the overall safety inspection, environmental inspection is strict; Hebei: Hebei Hongke normal production Exempted from the wrong peak, Hebei Quxin carbon limited production of 20%, Xinfeng only birth block; Shanxi area: currently only two small generation processing as anode, Danyuan conversion, Guan Aluminum discontinued; Jiangsu area: enterprise production is normal, environmental protection The pressure is still large. Hubei area: strict inspection, Hubei Tailai carbon is mainly processed, molding has stopped, currently only calcined coke, Yangxin Liyu carbon is suspended in environmental protection transformation; Henan area: Huihao environmental protection equipment rectification, the current production state.

Gongyi and Shuyang all stopped production, Zhengzhou Great Wall Aluminum Industry participated in the wrong peak, limited production half, and may stop production in the later stage, Henan Branch has all stopped production. Luoyang, Jiaozuo, Sanmenxia enterprises can be exempted from ultra-low. The supply of carbon blocks for individual anodes of the supporting anodes was slightly reduced due to downstream construction. After the technical transformation of carbon forming in Huanghe Xinye, it was officially put into operation and normal operation; the output of Qinghai Qiaotou was reduced, mainly due to the reduction of production of electrolytic aluminum; the shutdown of Chinalco Liancheng carbon was completed, Chinalco Lanzhou Carbon is discontinued and the main digested inventory is currently available.

Fushun Aluminum's new carbon project (350,000 tons) roasting furnace was successfully ignited and started. It is expected that the products will be burnt and burned first in the second quarter of 2019.

Cost: Calcined petroleum coke for prebaked anode: 2018.12.07 This week, the price of petroleum coke market went up and down. Among them, the Sinopec refinery made up the price, the refining price of the refining bottom bottomed out, and the coke price of CNOOC remained weak. The price is stable and wait and see. The price of downstream electrolytic aluminum is still in a downward trend, and the calcined coke is under pressure, so the overall support for the raw material petroleum coke market price is weak. This week, the price of petroleum coke in Sinopec's refinery was lowered by 40-50 yuan/ton, and the individual refineries of PetroChina were lowered by 100 yuan/ton.

Coal tar pitch: The price of coal tar pitch is mainly discussed this week. Under the support of slightly lower supply of medium temperature asphalt, the downward trend tends to be slow. It is expected that the monthly pricing of the big factory may be lower than the previous forecast, and the coal tar pitch market will gradually bottom out next week, and the manufacturer of the modified asphalt main production area will talk about it.

Supply: According to Baichuan Information, in November 2018, China's prebaked anode market totaled 1,546,900 tons (including commercial anodes of 767,500 tons and supporting anodes of 779,400 tons), a decrease of 46,500 tons from the previous month, a decrease of 2.89. %. The main reason for the decline in production: the commercial production of enterprises in the main pre-baked anode production area in Henan Province, the output of most enterprises on the basis of 50% of production, the output will be reduced by half, and even the output of individual enterprises in November, resulting in a decrease in the market anode anode commercial supply; In the supporting anode, the aluminum Lanzhou and Liancheng carbon plants were discontinued, and the aluminum plant in Qinghai reduced production, and the supply of enterprises in individual regions decreased.

Production reduction: Shanxi Jinneng Group Cangzhou Energy Aluminum Silicon Alloy Co., Ltd. maintains 30 sets of 220KA electrolyzers, involving a production capacity of 18,000 tons. Xinjiang Tianlong Mining Co., Ltd. has a capacity of 45,000 tons of electrolytic aluminum, and its current operating capacity is 200,000 tons. Shandong Weiqiao aluminum power peak reduction production, is expected to reduce production by about 10%, is expected to be completed before December 1. The hydropower maintenance and production reduction in western Qinghai has been reduced by 100,000 tons. The remaining 141 sets of 400KA electrolyzers in Qinghai Xinheng Aluminum were shut down. Shandong Huayu aluminum power peak has been reduced by 50,000 tons. Gansu Liancheng Aluminum has stopped 59 units and suspended production for awaiting the outcome of the negotiations. Shanxi Taiyuan East Aluminum Aluminum was shut down completely. Gansu Dongxing Aluminum Jiayuguan Branch reduced production by 80,000 tons, and Daixi Branch reduced production by 100,000.

Dengda Group Aluminum and Henan Yongdeng Aluminum (Yangcheng) have slightly reduced production. Gansu Zhongrui Aluminum has all stopped production. Linfeng Aluminium Power Co., Ltd. all stopped production. Henan Zhongfu Industrial actively reduced production by 100,000 tons. Shanxi Zhaofeng Aluminium Power is expected to shut down 65 units and involve a production capacity of 40,000 tons. Zouping Aluminum has all stopped production. Henan Shenhuo reduced production by about 120,000 tons. Xinjiang Oriental hopes to reduce production to 800,000 tons. Shaanxi Tongchuan Aluminum Division stopped. Huo Coal Tongshun Aluminum is expected to withdraw from the market in 2020. Chinalco Guizhou has completed production cuts. The overhaul of the hydroelectric electrolysis tank in the western part of Qinghai is about to begin, with a planned reduction of 150,000 tons. Qinghai Xinheng Aluminum Co., Ltd. is expected to shut down 140,000 tons due to losses and other issues, and currently has a production capacity of 140,000 tons.

Resumption of production: Inner Mongolia Jinlian aluminum gradually began to resume production. Jiaozuo Wanfang Aluminum has completed the resumption of production and partial trough repairs. Henan Zhongfu Industrial Co., Ltd. has resumed production of 60,000 tons, and will resume production of 50,000 tons. Henan Wanji has a current operating capacity of 550,000 tons. Henan Yongdeng Aluminum Industry (Yangcheng) completed the resumption of production. Yichuan Power Group Yugang Longquan Aluminum has some tank repairs, and the rest of the production has been completed. The current production capacity is 600,000 tons.

New production: Shanxi Chinalco China Resources maintains a current capacity of 100,000 tons. The four-stage 100,000 tons of Guangxi Hualei new materials is expected to be completed around Christmas. Inner Mongolia Chuangyuan has a production capacity of 120,000 tons. It is now temporarily put into operation due to the power problem. It is expected to start production in early December. A series of 125,000 tons of aluminum in Guangxi Debao 100 Mine was started. It is expected that the second series will be 125,000 tons in early January 2019. A series of 125,000 tons of aluminum in the Tianlin Baiyuan Mine in Guangxi has been completed. The first phase of Gansu Zhongrui Aluminum Industry has completed 100,000 tons. The second series of 100,000 tons of Guangxi Suyuan Investment Co., Ltd. is expected to start production in January 2019.

Guangxi Laibin Yinhai Aluminum has a production capacity of 500,000 tons. The 125,000 tons of the fourth section of Guizhou Huaren Aluminum Industry has been completed and put into production. The problem of 125,000 tons of electricity in the first phase of Guizhou Xingren Denggao New Material was once again delayed. Inner Mongolia Huayun New Materials on the 21st, the remaining 88 sets of the second plant began to start, and is currently completed. Baotou Xinhengfeng Energy has already put into operation 200,000 tons. Mengtai Aluminum in Baotou City will be put into production of 50,000 tons. Shaanxi Meixin is expected to start production on December 10. Yingkou Xintai Aluminum Co., Ltd. is expected to complete production by the end of November. Yunnan Yun Aluminum Haixin Aluminum Co., Ltd. put into operation 100,000 tons. Heqing Yixin Aluminum Co., Ltd. is expected to put into operation 150,000 tons, and it is expected that it will not be put into production within 2018.

The market outlook: raw material petroleum coke prices began to rebound individually, coal tar pitch prices are weak, short-term pre-baked anode support is slightly weak; downstream aluminum prices "falling down", electrolytic aluminum enterprises actively reduce production, limited anode demand Supply side: Even if some enterprises in Henan have stopped production, in view of the small production capacity of enterprises and the low operating rate before the suspension of production, the impact on the overall supply of the market is limited, and it is difficult to break the current oversupply situation in the market. Prices are stable and the export volume is expected to increase slightly.

Published in News

Graphitized petroleum coke recarburizer mainly contains 0.3% sulfur and 0.05% sulfur. The lower the sulfur content, the higher the price of calcined petroleum coke. The low-sulfur and low-nitrogen total graphitied petroleum coke recarburizer is mainly used for casting material ductile iron. Foshan Jitian recarburizer is mainly supplied to Guangdong and surrounding areas. Due to business development, it will also set up a branch in Chongqing to expand the supply of recarburizers in Chongqing and surrounding areas.

The development of Chongqing's industry has driven the increase in demand for materials. For the foundry industry, the demand for recarburizers is also the same. In 2015, there were 7,747 industrial projects under construction in Chongqing, with a total planned investment of 1.08 trillion yuan. 137 key projects such as Beijing Hyundai and Huike Panel started construction on schedule. The total planned investment is 109.6 billion yuan, and the investment completed during the year was about 34 billion yuan. 122 projects including the first phase of Huachen Xinyuan Fuling Base and Juyuan Stainless Steel were put into operation on schedule. 74 projects including Changan Ford Third Plant, Beiqi Yinxiang Phase I Expansion and Southwest Aluminum 220,000 tons Aluminum Casting were put into production on schedule. The total output value of the production projects reached 154 billion yuan, contributing 53% to the industrial economic growth.

The graphite recarburizers supplied by Yoshida Recarburizer are as follows:

Semi-graphitized petroleum coke recarburizer:
Fixed carbon (FC) /% : ≥98
Sulfur (S) /% : ≤0.3
Moisture (%) /%: ≤0.5
Ash (A)/% : ≤0.8
Volatile (V) /%: ≤0.8
Nitrogen (N) /%: ≤0.2
Particle size Remarks: 0-1mm 0-2mm 0-3mm 0.5-2mm 2-8mm 8-30mm (produced according to customer requirements)

Fully graphitized petroleum coke recarburizer:
Fixed carbon (FC) /% : ≥98.5
Sulfur (S) /%: ≤0.05
Moisture (Mad) /% : ≤0.5
Ash (A)/%: ≤0.8
Volatile (V) /%: ≤0.8
Nitrogen (N) /%: ≤0.03
Particle size Remarks: 0-2mm 1-5mm 8-30mm (produced according to customer requirements)

Feel free to contact us for the latest price of recarburizer, or if you have any needs, we can discuss it and look forward to your call!

related information:
Chongqing Foundry is the foremost person in the state-owned company. Chongqing Precision Casting is mainly engaged in the research and development, production and sales of vehicles and vehicle zero parts, electrical appliances, general environmental protection, machine tools, military electronic information, and smelting metal products. It is the first state-owned company listed outside Hong Kong since its direct administration.

The reason for the rapid growth of the foundry mold industry is mainly due to the rapid development of China's automobile and motorcycle industry and the rapid growth of casting mold production. As we all know, casting parts are used in a wide range of applications, almost all industrial fields, in which the casting parts of automobile parts are ranked first in terms of their large quantity, variety, strict requirements, high quality and the use of non-ferrous metal materials. , the largest share of the entire foundry industry.

In recent years, due to the prosperity of industry, there has been a dilemma of electricity shortages throughout the country in the summer, especially in the high-energy consumption industries such as foundry and metallurgy, which have been staged in the hot summer. In order to implement the goal of casting energy saving and consumption reduction proposed in the “Twelfth Five-Year Plan”, we will continue to deepen the structural energy-saving measures such as eliminating backward casting capacity and strictly adding energy-saving assessment of casting projects, increase the promotion of advanced applicable casting energy-saving technologies, and strengthen the foundry industry. And enterprise energy management.

At present, China's automobile and motorcycle industry has entered a period of rapid growth, and its output has grown substantially for many years. It ranks first in the world, especially the car that is closely related to the foundry industry has the fastest growth, and has dramatically increased to complex, large-scale, The demand for precision casting molds has thus become an important support for the foundry industry – the foundry mold industry has achieved unprecedented opportunities for development. It can be predicted that the production of casting molds in China will still gain strong thrust mainly from the domestic automobile industry in the next few years.

Published in News

On the evening of December 1, local time in Argentina, President Xi Jinping was invited to meet with US President Trump in Buenos Aires and reached an important consensus. The two sides stopped paying customs duties. The international community positively evaluated the first meeting of the China-US dollar and believed that the meeting will point the direction for the development of Sino-US relations and send a positive signal to the world.

The world's major media are competing to report:
William Jones, president of the Washington Branch of the US Global Strategy Information magazine, said that the two sides agreed to resume negotiations on economic and trade issues as a positive step. Although a meeting cannot solve all the problems between the United States and China, the meeting of the heads of state undoubtedly regained positive momentum in the US-China relationship.
Alexei Maslov, director of the Oriental Studies Department of the Russian Higher School of Economics, said that the consensus reached at the first meeting of the US dollar showed that China and the United States are willing to find a solution to the problem through consultation.
Shi Shiwei, a visiting professor at the Free University of Berlin in Germany, said that the important consensus reached by the Chinese and US dollars set the tone for the next two bilateral negotiations, which were to be carried out by the two countries, and set forth the target requirements, which is conducive to the benign interaction between the two countries.
Japanese economist Tian Daixiu said that today's global economy is closely linked and that the interests of the country are enhanced through the application of tariffs. The result is likely to be worth the candle. The first meeting of the US dollar and its positive results are of great significance to the world economy.

As the world's two largest economies, the Chinese and American economies have had a considerable impact on the world economy. The previous trade-off tariffs have already strained the surrounding countries. This time, a consensus can be said that everyone is relieved. The same is true for the Chinese economy, the economy is booming, and all industries benefit.

For the calcined petroleum coke industry, the development of the foundry industry and the demand for raw materials will also increase. The recent supply of Foshan Jitian recarburizer has also become tense. First, the foundry industry has experienced a downturn caused by various factors in the previous period. Recently, This has led to an upward trend. Second, now that China and the United States will shake hands, the demand will increase. At the same time near the end of the year, everyone has the momentum to be ready.

Published in News

According to reports, at 24 o'clock on November 30, 2018, a new round of refined oil price adjustment window was opened again. Domestic oil prices may usher in a "three-day losing streak", and most of the country's 92nd gasoline will return to the "6-yuan era." It is generally believed that the petroleum charcoal recarburizer is refinery because the raw material is derived from the processing of petroleum crude oil. It is considered that the price of oil is related to the price of calcined petroleum coke, but in fact, the impact is actually very small, and the price of calcined petroleum coke recarburizer is mainly affected by The relationship between supply and demand of raw petroleum coke and the relationship between supply and demand of recarburizer itself is relatively large, and the price of petroleum is very small.

According to the forecast of Longzhong Information, Zhuochuang Information and other institutions, the reduction is about 500 yuan / ton, which is equivalent to a price increase of 0.4 yuan / liter. After this price adjustment, the No. 92 gasoline in most parts of the country will return to the "6-yuan era", which is the level of April this year. At present, the retail price per liter of 92nd gasoline in most regions is between 7.1 yuan and 7.3 yuan. The fall in oil prices has a certain positive effect on the economy, and various industries are active. Among them, the demand for recarburizers in the foundry industry will also increase. If the demand exceeds supply, the price of recarburizers will also rise.

Yoshida recarburizer mainly supplies 0.3% sulfur semi-graphite recarburizer, sulfur 0.8 ordinary calcined coke recarburizer and sulfur 0.05% full graphite recarburizer. The index and particle size are as follows:

The semi-graphitized petroleum coke recarburizer indicators are as follows:
Fixed carbon (FC) /% ≥ 98
Sulfur (S) /% ≤ 0.3
Moisture (Mad) /% ≤0.5
Ash (A)/% ≤0.8
Volatile matter (V) /% ≤ 0.8
Nitrogen (N) /% ≤ 0.2
Particle size Remarks: 0-1mm 0-2mm 0-3mm 0.5-2mm 2-8mm 8-30mm (produced according to customer requirements)

The calcined coke recarburizer indicators are as follows:
Fixed carbon /% ≥98
Sulfur content /% (m / m) ≤ 0.7
Moisture /% (m / m) ≤ 0.5
Ash/%(m/m) ≤0.28
True density / g / cm3 ≥ 2.03
Powder resistivity / uΩ. m
Particle size Remarks: 0-1mm 0-2mm 1-3mm 1-5mm 8-30mm (produced according to customer requirements)

The indicators of total graphitized petroleum coke recarburizer are as follows:
Fixed carbon (FC) /% ≥98.5
Sulfur (S) /% ≤ 0.05
Moisture (Mad) /% ≤0.5
Ash (A)/% ≤0.8
Volatile matter (V) /% ≤ 0.8
Nitrogen (N)/% ≤0.03
Particle size Remarks: 0-2mm 1-5mm 8-30mm (produced according to customer requirements)

Customers in need can contact the latest price of recarburizers, both domestic and export.

Published in News

High carbon recarburizer, generally refers to the petroleum caramel recarburizer, the carbon content is more than 98%, the sulfur content of the low sulfur calcined coke recarburizer is generally less than 1%, and the carbon supply supplied by Foshan Jitian Foundry Co., Ltd. There are three types of sulfur in the agent, 0.8%, 0.3% and 0.05%, respectively, which can be used in most foundries.

Located in the eastern part of Guangxi, Ganzhou, Guijiang and Xijiang Confluence, Cangzhou has been called the “Three Rivers and Confluences” since ancient times. It is located in the “Three Circles and One Belt” (the Pearl River Delta Economic Circle, the Beibu Gulf Economic Circle, the Great Southwest Economic Circle and the Pearl River – Xijiang Economic Belt) The carbonation agent supplied by Foshan Jitian Foundry Materials Co., Ltd. is also often supplied to all major regions of Guangxi. According to the sulfur content, it is divided into three grades, which are 0.8% of post-calcined coke carbon. Agent, sulfur 0.3% semi-graphite recarburizer, sulfur 0.05 total graphite recarburizer, the specific indicators are as follows:

The calcined petroleum coke recarburizer indicators are as follows:
Fixed carbon /% ≥98
Sulfur content /% (m / m) ≤ 0.7
Moisture /% (m / m) ≤ 0.5
Ash/%(m/m) ≤0.28
True density / g / cm3 ≥ 2.03
Powder resistivity / uΩ. m
Particle size Remarks: 0-1mm 0-2mm 1-3mm 1-5mm 8-30mm (produced according to customer requirements)

The semi-graphitized petroleum coke recarburizer indicators are as follows:
Fixed carbon (FC) /% ≥ 98
Sulfur (SI) /% ≤0.3
Moisture (Mad) /% ≤0.5
Ash (A)/% ≤0.8
Volatile matter (V) /% ≤ 0.8
Nitrogen (N) /% ≤ 0.2
Particle size Remarks: 0-1mm 0-2mm 0-3mm 0.5-2mm 2-8mm 8-30mm (produced according to customer requirements)

The indicators of total graphitized petroleum coke recarburizer are as follows:
Fixed carbon (FC) /% ≥98.5
Sulfur (SI) /% ≤ 0.05
Moisture (Mad) /% ≤0.5
Ash (A)/% ≤0.8
Volatile matter (V) /% ≤ 0.8
Nitrogen (N)/% ≤0.03
Particle size Remarks: 0-2mm 1-5mm 8-30mm (produced according to customer requirements)

related information:
Cangzhou Hardware Casting Co., Ltd. is located in Poshui Town, Cangzhou City, Guangxi Province. The 321 National Highway and the Guiyu Expressway pass by. The water transportation and railway can directly reach all major cities and ports in the country. It is 15 kilometers away from Chenzhou City. The company is a private enterprise engaged in foundry products and titanium smelting. The company has two production workshops of 6,000 square meters, two medium frequency electric furnaces, two electric arc furnaces, two heat treatment electric furnaces and other fixed assets of 10 million yuan. The main products are: high titanium slag, acid slag, TQ new anti-wear alloy grinding ball, chrome alloy grinding ball, spheroidal casting. With an annual output of 6,000 tons of grinding balls, high titanium slag, acid slag 1200 tons.

Ductile iron pipe is cheap and has the unique advantages of innate low cost: it has a short process technology of smelting and casting integration advocated by the foundry association; a series of pre-iron production conditions such as coking, pelletizing, sintering, coal injection, power generation, etc. Complete iron and steel preparation industry chain; low-phosphorus and low-sulfur iron ore in Shanxi is abundant; blast furnace, coke oven gas, steam supply is sufficient; labor cost is relatively low. It is easy to demould and can consume ingots with good surface quality. The structure is simple, the device is inconvenient, and there is a certain strength, rigidity and impact resistance. It is certain that the compression ratio of the ingot is different, the alloy is different, the specifications are different, and the compression ratio is not the same. In the case of ductile iron pipes, the ingots are 1.6% to 3.1%, and the compression ratios of the slabs vary greatly. The compression ratio of the cross section of the ingot is 1.

Specially produced DN100-DN1400mm ductile iron pipe and ductile iron pipe fittings are made of cupola iron, after electric furnace quenching and tempering--spheroidizing treatment--centrifugal casting--core--stable--annealing--spraying-- Round and sanding--hydraulic pressure test--cement inner coating--health---external coating of asphalt and other processes are strictly in accordance with the standard GB/T13295-2013 and ISO253-98E. Our company has strong production strength, advanced technology and equipment, and key equipment such as medium frequency electric furnace and spectrum analyzer are imported from abroad. The whole production line of centrifugal forming, annealing, zinc spraying, finishing and packaging is at the level.

Published in News

The recarburizers based on petroleum coke mainly include carbon 98 calcined petroleum coke recarburizer and carbon 99.5 graphitized petroleum coke recarburizer. The price difference between the two recarburizers is relatively large, and some customers need a compromise choice. There is a semi-graphite recarburizer. Different recarburizers vary in price depending on the carbon and sulfur content. Customers in need can contact the latest recarburizer prices.

Foshan Jitian Foundry Materials Co., Ltd. also supplies the above three kinds of recarburizers. The specific indicators are as follows:

Carbon 98 calcined petroleum coke recarburizer:
Fixed carbon ≥98 Indirect carbonization method Q/HSLHHZSH 1001-2017
True density / g / cm3 ≥ 2.03 YS / T 587.9
Powder resistivity / uΩ. m ≤600 YS/T 587.6
Ash/%(m/m) ≤0.28 YS/T 587.1
Sulfur content /% (m / m) ≤ 0.7 GB / T 214
Moisture (customer requirements) /% (m / m) ≤ 0.5 YS / T 587.2
Particle size Remarks: 0-1mm 0-2mm 1-3mm 1-5mm 8-30mm (produced according to customer requirements)
         
Carbon 99.5 Graphitized Petcoke Recarburizer:
Moisture (Mad) /% ≤0.5 GB/T211-2007
Ash (A)/% ≤0.8 GB/T212-2008
Volatile matter (V) /% ≤ 0.8 GB/T212-2008
Fixed carbon (FC) /% ≥98.5 Indirect carbonization method GB/T212-2008
Nitrogen (N) /% ≤0.03 Oxygen and nitrogen analyzer GB/T214-2007
Sulfur (SI) /% ≤0.05 sulfur analyzer GB/T30733-2014
Particle size Remarks: 0-2mm 1-5mm 8-30mm (produced according to customer requirements)
              
Carbonized semi-graphitized Petcoke carbonizer:
Moisture (Mad) /% ≤0.5 GB/T211-2007
Ash (A)/% ≤0.8 GB/T212-2008
Volatile matter (V) /% ≤ 0.8 GB/T212-2008
Fixed carbon (FC) /% ≥ 98 indirect carbonization method GB/T212-2008
Nitrogen (N) /% ≤ 0.2 Oxygen and nitrogen analyzer GB/T214-2007
Sulfur (SI) /% ≤0.3 sulfur analyzer GB/T30733-2014
Particle size Remarks: 0-1mm 0-2mm 0-3mm 0.5-2mm 2-8mm 8-30mm (produced according to customer requirements)

The predecessor of Foshan Chanshan Foundry Co., Ltd. is Foshan Foundry with a history of nearly 50 years. Up to now, our company has a complete range of casting processes including resin sand, dry sand, tidal sand, synthetic sand, water glass sand and gypsum sand, and a group of more advanced casting production and testing equipment and a The experienced team of design, management and production is very adaptable. The product range includes: HT150~HT300 gray cast iron parts; QT400~QT700 ductile iron parts; special alloy castings; copper and aluminum alloy castings and various handicraft castings with different materials; BS standard series ductile iron pipe fittings; Rod type elastic gate valve; pneumatic rotary riveting machine series; various light and heavy security anti-theft manhole covers. The products are mainly exported and exported to Europe, America, Australia, Japan, Hong Kong, Taiwan and Southeast Asia. On the basis of new planning and expansion of production sites, and the introduction of a large number of advanced equipment, the annual production capacity of various grades of gray cast iron parts, ductile iron parts, copper and aluminum castings exceeds 10,000 tons.

Foshan Jinda Technology Co., Ltd., formerly known as Foshan Nanhai Jinda Precision Casting Co., Ltd., founded in 1995, is located in the Pearl River Delta, with convenient communication and transportation. The company is specialized in stainless steel, alloy steel and carbon steel. The main investment in precision casting and machining as one of the enterprises. The introduction of a full range of automated and semi-automated production equipment and the entire line of silica sol process production, to meet higher dimensional accuracy and surface quality requirements. We have a complete production line, including mold making, investment casting, machining and product assembly to meet the requirements of customer finished products. The products are mainly exported to Europe, America, Japan, Singapore, etc., and have established long-term friendly cooperative relations with customers.

Foshan Nanhai District Dali Xiebian Yongsheng Hardware Foundry is located in Dali Town, Nanhai, Foshan, the hometown of non-ferrous metals in China. It started in 1986 and started from the traditional hand-made copper processing. It has been more than 20 years old. The company has been engaged in the foundry of copper and aluminum for many years. It is a professional design and manufacturing enterprise for gravity casting and copper-aluminum casting. Our factory has many years of experience in aluminum die-casting and gravity casting. It is equipped with advanced casting, heat treatment and machining equipment. It adopts advanced technology and complete testing methods. It has a high-quality technical and management team and a perfect quality assurance system. . Mainly used in aluminum alloy sand casting, gravity casting, pressure casting, low pressure casting, precision casting and other casting processes, products related to mechanical parts, construction hardware, auto parts, pneumatic components, press parts, household items, public space leisure facilities and other related fields . Our factory can also produce and supply castings or finished products of various materials and models according to customer requirements, and produce heat-resistant alloy steel and wear-resistant alloy steel of various material specifications, high temperature, high pressure, high chromium high nickel alloy steel, special Steel casting and other products. Other customized products include: high temperature resistant castings, centrifugal casting tubes, precision castings, industrial furnaces, heat treatment furnace castings, heat resistant castings, wear resistant steel castings, stainless steel fittings, hardware tools, auto parts, marine and building structural parts, etc. .

Published in News

Low-sulfur calcined petroleum coke: 20181026 This week, the market price of low-sulfur calcined coke continued to push up. The inventory of various production enterprises was mostly in the middle and low position. Secondly, the operating rate of downstream graphite electrode enterprises increased, and the purchase volume of low-sulfur calcined coke increased slightly.

The low-sulfur calcination of raw materials in Liaoning has improved this week. The inventory of the company has decreased in the early period. The downstream electrode enterprises have started to purchase actively. The market resources of needle-shaped coke have decreased and the price has pushed up and the Fushun calcined coke market has been traded. This week, the market for low-sulphur screening with calcined coke was stable, and the downstream market was on-demand, with less inventory pressure. This week, the operating rate of Huizhou Petrochemical is still not 50%, the inventory is low, and the downstream receiving is positive.

Medium and high sulfur calcined coke: 20181026 This week, the market of high sulfur calcined coke was stable, and the market price of calcined coke in the market with a sulfur content of 1.5% was increased recently. In terms of production, this week's calcined coke enterprises started to fluctuate less, most of them are under normal production. Shandong Rotary Kiln has been ignited on October 22, and it is expected to be produced in early November. 250,000 tons/year of calcination is currently on the desulfurization equipment. It is expected to be ignited during the year; it is expected that the calcined coke will be out of focus in mid-November; the current calcined coke has been produced normally, with a sulfur content of 3.0% and sales within 2.5%.

As of 20181026, the domestic Shandong market sulfur 3.5% trace elements do not require calcination coke mainstream transaction price acceptance ** yuan / ton; sulfur 3.0% trace elements no requirement for calcined coke mainstream acceptance transactions ** yuan / ton; only require vanadium 400, other The micro-unrequired medium sulfur calcined coke factory mainstream transaction acceptance price ** yuan / ton; all trace elements are required within 300, sulfur content within 2.0% of the calcined coke factory price ** yuan / ton. Export high-end (strict elements of trace elements) indicators of calcined coke prices need to negotiate with the company.

The market outlook: medium and high sulfur calcined coke, it is understood that the recent demand for calcined coke is good, the calcined coke within the vanadium 400 due to rising raw material prices, profit margins, but some customers responded to recent shipments in general, so it is predicted that the price of domestic calcined coke will be next week Still based on stability. The market demand for low-sulfur calcined coke is still good. At present, most enterprises maintain low stocks. It is expected that the price of calcined petroleum coke will continue to strengthen in the short term.

Published in News

20181019 This week, the mainstream price of China's Recarburizer market is stable, the low-grade Recarburizer market is generally trading, the company's inventory is high, and the medium and high Recarburizer market is better. The heating season is just around the corner, the downstream steel mill's production restriction policy is clear, the company's operating rate is low, and the receiving sentiment is relatively dull. The Rebondurizer market price is generally stable and the possibility of deposit and loss is high. The prices of raw materials in the medium and high-grade Recarburizer market were generally raised after the holiday, and the cost pressure of production enterprises increased. However, due to the limited acceptance of the downstream market, the company's quotation has not been raised.

At present, the main materials of Recarburizer are coal and petroleum coke. The petroleum coke is divided into ordinary calcined Recarburizer and graphitized Recarburizer because of the degree of calcination. After years of tempering in the market, the petroleum coke Recarburizer has gradually replaced the market position of coal-based Recarburizer, and the shipment volume is relatively high.

Calcined Recarburizer:
This week, the mainstream price of China's general calcined Recarburizer market remained stable, and the overall market shipments were generally due to the general consumption of downstream steel mills, and the demand was relatively light. Most of the recalcinated Recarburizer manufacturers are electric calcined anthracite enterprises, self-produced screening, and the environmental protection facilities of the local enterprises in the main producing area are undergoing the inspection and acceptance of environmental protection facilities. If the enterprises fail to meet the standards or restrict production, the market starts will be limited. The production of enterprises in North China is normal, but the reaction starts low, the market is generally trading, and the enterprises have inventory.

Downstream: China's construction steel prices are trading strongly this week. Recently, in the environmentally-friendly production and the leading regions, the stock market digested and enlarged, coupled with the decrease in the shipments of the leading steel mills, the stronger willingness to price, and the support of the construction steel market continued to rise. It is understood that the Ministry of Housing and Urban-Rural Development said that all localities should take effective measures to speed up the progress of construction, increase the construction of supporting infrastructure for sheds, and the terminal demand is still acceptable. However, as the price gradually increases, the terminal transaction will gradually decrease, and the market risk preference will be lower. The high price of the willingness to accept is relatively limited, which is not conducive to the sharp rise in prices. Coupled with the recent snail and steel billet red and green intertwined, resulting in a turbulent mentality in the building materials market, traders are cautious, and the atmosphere is strong. Market outlook: It is expected that the short-term building materials market will fluctuate and strengthen, with a range of 50 yuan/ton.

Calcined Petroleum Coke recarburizer:
This week, the price of China's calcined coke Recarburizer is stable, the raw material price is high, and the production cost of the enterprise is high. However, in view of the environmental impact of the downstream enterprises, the low-level operation, the demand for Recarburizer is relatively stable, the market is generally trading, the late heating season is coming, the calcined coke Prices may fluctuate due to limited production, etc., affecting Recarburizer shipments, or will benefit other quality Recarburizer.

Medium and high sulfur calcined coke: This week, the medium and high sulfur calcined coke market was generally trading, the shipment was stable, the market was slightly weak, and the price of the coke was not adjusted. In terms of production, the production load of Zhaoxing carbon is increasing, and individual enterprises in Shandong Guangrao are not expected to reduce production. It is understood that the impact of this winter's limited production policy on calcined coke enterprises will be less than expected. A new carbon-fired enterprise in Shandong is expected to ignite four new calciners at the end of this month, and the monthly output is expected to increase by about 20,000 tons. There is no inventory backlog, and there is no pressure on the trading market of calcined coke. However, at the same time, after the production load of the enterprise is increased, coupled with the recent poor performance of the aluminum market, the price of domestic medium and high sulfur calcined coke at the end of the month is still at a downward risk, and the estimated range is about 50 yuan/ton. .

Graphitized petroleum coke Recarburizer:
This week, the price of China's graphitized petroleum coke Recarburizer is stable. The price of raw material petroleum coke is stable and the price is high. The pressure on the production cost of Recarburizer is increasing. Among them, the production of individual enterprises in Henan and Xinjiang was suspended due to environmental protection, and the operating rate fell. In addition, the graphitization enterprises of anode materials in the market will start construction in the second half of the year, and the output will be released. Enterprises in Jiangsu Province have normal production, good shipments and smooth exports.

Late prediction: The general market for recarburization of Recarburizer is currently trading, and the stock of enterprises is higher, but the price of raw materials for electric calcination may be lower due to limited production, which stimulates the price of Recarburizer; the price of calcined coke and graphitized Recarburizer is driven by cost. The pressure is increasing, and the price push is stronger.

Published in News

latest news:
At the hearing on October 9, 2018, the Supreme Court of India decided to liberalize import restrictions on carbon grade petroleum coke and calcined petroleum coke, while setting import quotas for carbon grade petroleum coke and calcined coke.

India's annual import quota is 500,000 tons of calcined coke and 1.4 million tons of carbon grade petroleum coke, but it is not allowed to be used as fuel. Petroleum coke is a sponge-like solid residue produced during the distillation of crude oil. Its calorific value is 1.5 times that of coal. It is usually used as fuel in electric power, glass, cement, and other industries. Because of the high calorific value of petroleum coke and the much cheaper price than coal, coupled with the loopholes in India's environmental protection tax, petroleum coke has become the most attractive raw material for Indian power stations and cement plants.

For India, petroleum coke is indeed cheap and easy to use, but it also costs a lot of use. India’s sulfur dioxide emissions have surpassed China in 2016 to become the world’s number one. At present, about 33 million people live in sulfur dioxide pollution. Area. To this end, the Modi government is determined to ban the use of petroleum coke as a fuel nationwide!

Petroleum coke market: The results of this hearing are also expected by all parties in the market. At present, Indian buyers are already in contact with Chinese petroleum coke and calcined coke suppliers. India’s two-month carbon-grade petroleum coke and calcined coke imports will soon recover.

China's petroleum coke price: For the current Chinese petroleum coke market, the impact is very limited. The export volume of petroleum coke from major manufacturers in the early stage was basically at the port level and did not enter the domestic market. The import restrictions on the release of petroleum coke in India are mainly to continue the previous export plan, which has little impact on the domestic petroleum coke market supply and demand.

Quota setting impact: The output converted to prebaked anodes is 165-1.7 million tons/year from the set limit. Compared with the demand for prebaked anodes in 2017, the demand for 1.7 million tons is basically the same.

For the Indian aluminum carbon market, the quota set this time basically meets the current demand. However, considering that India's electrolytic aluminum production has grown rapidly in recent years, the growth rate is basically 15%-20%, and the future demand is difficult to meet. There may be two situations in the future:
The first is that annual quotas are raised as demand for electrolytic aluminum increases;
The second is to still limit the current quota, or to increase the relative demand, and instead import more pre-baked anode products.

The second article above is relatively more in line with India's national environmental requirements. For the China Petroleum Coke Industry Chain, both of these situations can share the dividends generated by the development of the Indian electrolytic aluminum industry. Relatively speaking, if the second article is established, it will be more favorable to the domestic petroleum coke industry chain, which can boost the export of prebaked anodes, increase the utilization rate of prebaked anode capacity, and drive the demand for petroleum coke and calcined coke. Moreover, the recent domestic environmental protection policy is more rational, and it is also convenient for carbon enterprises to stabilize production.

Published in News

Monday (October 8th) today is the first working day after the National Day. According to the understanding of the price of petroleum coke during the National Day, the price remains mainly stable, and the price after the holiday has been adjusted. The price of calcined petroleum coke is slightly raised, and the coke is burnt. The price of recarburizer is temporarily unchanged.

The three major groups of petroleum coke market:
Sinopec, during the National Day, Sinopec's Tahe and Maoming Petrochemical prices have been adjusted, and today, Tahe coke prices continue to increase, it is reported that Tahe petroleum coke cumulative increase of 60 yuan / ton, Maoming petrochemical coke price before the holiday cut significantly 120 yuan / Tons, mainly due to the high price in the previous period, coupled with the price adjustment of the National Day holiday, the current oil coke shipments of the factory are low. The price of petroleum coke in Yanshan Petrochemical Company of North China was lowered by RMB 60/ton today. The factory shipped poorly during the festival and there were fewer transport vehicles. Luoyang Petrochemical's shipment is still acceptable, and the price of Dongming is raised to support its shipment. The price of Tianjin Petrochemical Railway Transportation was raised by RMB 50/ton. The quality of petroleum coke in Anqing Petrochemical was slightly lower due to higher prices in the previous period. The Sinochem Quanzhou coking unit has been shut down during the National Day and there is currently no inventory in the plant.

In the case of PetroChina and CNOOC, Daqing and Fushun Petrochemical in Northeast China began to sell their petroleum coke in October, and the shipment is relatively stable. Liaoyang Petrochemical's price is lowered by 50 yuan/ton today, and the coking unit of the plant is expected to be shut down for one year from mid-October. The commencement of the Liaohe petrochemical coking unit has been postponed and it is expected that products will be available in the middle. The petrochemical coking unit in the northwest region started construction at the end of September. At present, it has been out of focus, and the price is raised by 50 yuan/ton. Wu Petrochemical and Dushanzi Petrochemical petroleum coke shipped well, among which the petrochemical index of Wujiang Petrochemical continued to improve in the near future. The sulfur content was all within 1.0%, and the price of Yumen Petrochemical Petroleum Coke was raised by RMB 50/ton from 10.1.

Refining petroleum coke:
As the first working day after the National Day, the price of refinery petroleum coke has risen in an all-round way, with a concentration of 30-130 yuan/ton. Before the holiday, due to the high cost performance of the refining petroleum coke, the refineries have signed a large number of contracts. At present, most of the refineries have no inventory and the shipments are smooth. In terms of refinery dynamics, Hengbang Petrochemical Co., Ltd. resumed production and still produces projectile coke; Zhenghe Petrochemical Coking Unit was shut down for maintenance on September 30, and petroleum coke has no inventory; Longhai Petrochemical and Qirun Chemical Coking have not yet started.

Calcined petroleum coke recarburizer market:
Today, the market for calcined coke recarburizers is stable, and corporate prices have not been adjusted. During the National Day of PetroChina Liaohe Petroleum Exploration Bureau Co., Ltd., the two rotary kiln have been started normally. However, since the refinery coking unit has not been out of focus, the plant is not yet fully loaded. At present, the plant is burning coke recarburizer. The price is maintained before the National Day, and the shipment is acceptable.

Published in News
Page 1 of 5