zh-CNfrdeitptrues
  • 1
  • 2
2018

2018 (17)

SGS
Laboratory number MNE18500Gz
SGS Report Number MERGZ180061301
Test report page number: 1/1
Test Report
Applicant Name: Foshan Yoshida Foundry Materials Co., Ltd.
Applicant's Address: Room 329, 3rd Floor, Zijin Business Center, Xiawei Industrial Zone, Xiaxi, Guicheng, Nanhai District, Foshan City
Sample name: graphitized petroleum coke recarburizer (0-2mm)
Sample acceptance date: December 4, 2018
Sample testing cycle: December 06, 2018 to December 06, 2018
Sample serial number
Sample status: 1 sample, particle size <2m, weight about 276g, packed in plastic bags, complete in packaging.
On the application of the applicant, our laboratory will test the sample of the applicant according to relevant standards or methods. The specific test results are as follows

Test items
Symbol unit receives base air drying base "dry basis dry ashless base
Daf
testing base

Analyze sample moisture
0.18
GBT2001-2013

Ash
A
%%%%%
0.31
0.31
GBT2001-2013

Volatile matter
0.54
0.54
0.54
GBT2001-2013

Fixed carbon
98.97
GB/2001-2013

Total sulfur
S
0.24
024P
GB/2142007

Warning: The samples covered in this report are obtained or provided by the customer or a third party who accepts its instructions. The results of the report are strictly limited to the sample being tested and there is no guarantee that the sample will be representative of any cargo. We do not accept any responsibility related to the source or source of the sample. This test report is only used for customer research, teaching, internal quality control, product development, etc. It does not have a social proof role and is for internal reference only.
Tongbiao Standard Technology Service Co., Ltd. Guangzhou Branch

The signature of the unsigned signature of the report is invalid; this report may not be partially reproduced without the written approval of our company.
This report is issued by our company in accordance with its "General Terms of Service". Please pay special attention to the holders of the report that need to be informed. The content of this report only reflects the conclusions obtained by SGS at the time and is subject to customer instructions. SGS is solely responsible to its clients and this report does not exempt the parties from the rights and obligations of the transaction documents. Any unauthorized modification of the content and form of this report, forgery or distortion is a violation of the rules and regulations, and the offender will be held liable.
Inspection& Testing Services
Attention: To check the authenticity of testing /inspection report certificate, please contact us at telephone: (86-755)8307 1443 ds Technical sLtd
No. 198, Kezhu Road, Science City, Economic and Technological Development Zone, Guangzhou, China

Graphitized Petroleum Coke Recarburizer 2-8mm SGS Test Report Fixed Carbon 98.67 Sulfur 0.02 Nitrogen 0.03
Date: September 13, 2018

Moisture: 0.16 %
Ash: 0.14 %
Volatile matter: 1.03 %
Fixed carbon: 98.67%
Total sulfur: 0.02 %
Nitrogen: 0.03 %

High-efficiency graphite recarburizer produced by Foshan Yoshida Foundry Materials Co., Ltd. has high carbon content, low sulfur content, bright color, light specific gravity, uniform particle size and uniformity, small ash content, and can be added at the bottom of the furnace or added with the charge. Easy to melt and easy to absorb, and does not produce floating impurities, the unit cost of carbon is lower. Applicable to large, medium and small cupolas and electric furnaces, widely used in scrap iron making, ductile iron casting, steel making and other industries. The particle size of Foshan Jitian graphitized recarburizer is 1-5mm, 8-30mm, sulfur 0.05;

For this calcined petroleum coke, the size is 0-50mm, fixed carbon is 97%, the other specifications you can check the table above, we did test every day to inspect the quality, and we can supply 20000-30000mt/month, mainly supply to aluminium plant.

Calcined petroleum coke is a high purity carbon material produced by heating green petroleum coke to drive off moisture, volatile matter, and impurities and to increase its electrical conductivity, which is used to improve the carbon content in steel-making and ductile iron foundry. It is widely used to produce graphite electrode, graphite blocks, brakes pads and other carbon products. it can also be used as carbon additive in some steel and aluminum plants, another, it is used in refractory, insulation, filler,etc. We can supply different grades of Calcined Petroleum coke.

The main application of Calcined Petroleum coke is in the production of anodes for the Aluminum Smelting process. 70 - 80% of CPC is for the Aluminum Industry. The reason for use in the Aluminum Industry is for conductivity.

Another used for Calcined Petroleum coke is TiO2 production which accounts for about 15% of the Calcined Petroleum coke consumption. The reason for use in TiO2 is for its oxidizing effect.

Graphitized Petroleum Coke 0-3mm Recarburizer

Date: July 17, 2018

Moisture: 0.10%

Ash: 0.78%

Volatile Matter: 0.73%

Fixed Carbon: 98.39%

Sulphur: 0.18%

Nitrogen: 0.03%

Graphitized Petroleum Coke(GPC) is made from high quality petroleum coke under a temperature of 2,500-3,500°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity etc.It can be used as carbon raiser ( Recarburizer ) to produce high quality steel, cast iron and alloy.It can also be used in plastic and rubber as an additive.

Page 1 of 5